| |
|
|
HGU-84 Energy Absorbing (EA) Liner
The energy absorbing liner is made of rigid polystyrene molded to conform to the inside of the helmet shell. |
|
HGU-84 Super Comfort Liner (SCL)
Super Comfort Liners are made from layers of plastic and foam that are molded standard head sizes. SCL liners are very comfortable because their inner layer of visco elastic foam instantly and continuously adjusts to your head. |
|
X-Liner
X-Liner is the most advanced high-tech helmet liner. It is cool, clean and comfortable. |
|
HGU-84 Integrated Chin & Nape System
Complete chin and nape system for HGU-84. |
|
HGU-84 Oblong Grommet
This grommet protects the chin strap as the strap goes through the helmet shell. Two are required per helmet. |
|
HGU-84 Integrated Chinpad
Chinpad, made of polyester/cotton fabric, slides on to the chinstrap. |
|
HGU-84 Earcup Kit
Complete earcup kit. Includes earcups, earseals, and earphone holders. |
|
Gel Earseals
Gel-filled earseals used with earcups to add comfort and sound attenuation. |
|
Leather Comfort Earseals™ Black
Leather covered visco-elastic foam earseals to use with earcups. |
|
HGU-84 Earcup Spacer Set
Spacer system to adjust earcups for maximum comfort and sound attenuation. |
|
HGU-84 Single Visor Lenses
Replacement lenses for single visor system. Available in dark, clear, amber, and gradient lenses. |
|
HGU-84 Single Visor Kit
Complete visor system, including single lens housing and one dark lens. |
|
HGU Sun bill for EEK visor housing
Keep the sun out of your face with a removable sun bill for your helmet. |
|
HGU-84 Single Visor Housing
Visor housing for single visor system. |
|
HGU-84 Track and Spacer Kit
Complete set of tracks and spacers for the single visor housing systems. |
|
HGU-84 Visor Hardware Kit
Complete hardware kit to attach a single visor system. |
|
HGU Visor Lock Assembly
Complete visor lock assembly for single visor system. Also available as single components. |
|
Dual Bungee Visor Kit
Complete dual lens system, dark and clear lenses, with elastic straps. |
|
Single Bungee Visor
Replacement lenses for HGU-84 single lens bungee system. Available in dark, clear, amber, gradient, and high contrast lenses. |
|
HGU-84 Leather Lens Cover
Lens cover to protect lens when not in use. |
|
HGU-84 High Profile Lens Stop
Lens stop for dual bungee system. |
|
HGU-84 Integrated Barrel Lock
Napestrap clamp for adjusting the fit of the integrated chin and nape straps. |
|
HGU-84 Low Profile Lens Stop
Lens stop for the single lens bungee system. |
|
HGU-84 Maxillofacial Shield
The MaxilloFacial Shield (MFS) safeguards the lower face from rotor wash, flying debris and windblast during helicopter operations. For single and dual bungee visor systems. |
|
HGU-84 Maxillofacial Shield Hardware
Complete set of hardware to attach a maxillofacial shield. |
|
HGU-84 Dual Visor Assembly
Complete dual lens visor system, including visor housing and two lenses. |
|
HGU-84 Dual Visor Housing
Visor housing for dual lens system. |
|
HGU-84 ANVIS Dual Visor Assembly
Complete visor system, including dual lens housing and two lenses. Compatible with ANVIS night vision system. |
|
HGU-84 Dual Visor Housing for ANVIS Quick Disconnect
Dual lens visor housing compatible with ANVIS night vision system. |
|
HGU-84 ANVIS Mount for Quick Disconnect
Interface between ANVIS housing and the ANVIS mount. |
|
HGU-84 ANVIS Loop Fastener Kit
Kit of self-adhesive pile patches for securing ANVIS battery pack to the rear of helmet. |
|
HGU-84 Dual Visor Lenses
Replacement lenses for dual visor system. Available in dark, clear, amber, gradient, and high contrast. |
|
HGU-84 Dual Visor Lock Assembly Black
Complete visor lock assembly, for locking the lens in the desired location |
|
HGU-84 Dual Visor System Track and Spacer Kit
The full compliment of tracks and spacers for the dual visor system. |
|
HGU-84 Dual Visor System Hardware Kit
Complete hardware kit for the attachment of dual visor system. |
|
Mole Skin
Self adhesive patches for protecting lens from
scratching against visor housing. |
|
HGU Chrome Jack Retainer
Hooks on to helmet cord grommet and supports U-172 jack on HGU-33, HGU-55, HGU-68, HGU-84 helmets |
|
